Website Main content
Website Secondary navigation Projects & exhibitions

Nelligen Water Supply and Sewerage Scheme

Project: Provide a reticulated pressure sewerage scheme and water supply to village properties.

Funding: NSW Government is providing $3.5 million through the Safe and Secure Water Program. Council will contribute the remaining required funds.


  • 2019 - 2020: Design work
  • 2021: Construction of water reservoir and trunk mains, sewage pump station and sewer rising mains
  • 2022: Installation of pressure sewer systems on properties
  • 2022/23: Scheme operational

Last updated: March 2020

A river flows through the village of Nelligen


Council is working towards providing Nelligen village with a reticulated sewerage scheme and water supply. The project is identified in Council’s long-term water and sewer strategic plan, the Integrated Water Cycle Management Strategy.

The provision of a sewerage scheme to replace the existing on-site sewage management systems in Nelligen is a high priority due to an increasing number of sewage pump-out system and failures of on-site treatment and disposal systems. Many properties do not have adequate space and/or have poor quality soils for on-site disposal. The potential impacts on oyster leases and recreational use of the Clyde River are additional considerations.

In conjunction with the installation of the sewerage scheme, a reticulated potable water supply will be provided to the village.

The new facilities will be linked to existing water and sewer infrastructure in Batemans Bay.

Water supply

We will install a pipeline to transfer water from Batemans Bay to a new water supply reservoir - a concrete storage tank - on public land on Old Nelligen Road.

The reservoir will gravity-feed water to Nelligen village and on to individual properties. A water meter and connection point will be installed at the boundary of each property identified within the project.

Property owners may retain their rainwater tanks as either a primary or supplementary water supply, in accordance with appropriate plumbing regulations.


  • Property owners will be responsible for the connection of the existing household plumbing to the new mains water supply
  • Once the water supply is available, property owners will be charged the standard fee, currently $330 per year
  • Water usage will be charged at the standard rate, currently $3.65 per 1,000 litres.

Pressure sewerage system

A reticulated system will be installed throughout the village to collect sewage from individual properties. A new pumping station and rising main will transfer waste to the Batemans Bay Sewage Treatment Plant.

The new system will replace existing on-site sewage management systems, such as septic tanks and pump outs, and will reduce the risk of harm to the environment and public health.

A pump unit will be installed below ground on each property to collect and pump sewage to the street mains via a new pipe and a boundary kit. The pump unit is approximately 1m in diameter and 2m deep.

In comparison to a traditional gravity-fed system, a pressure sewerage system has lower installation costs and reduced environmental and social impacts. The small diameter pipes can be installed at a shallow depth requiring minimal site disturbance. Pipes can be installed using horizontal drilling technology, avoiding deep excavations throughout the village.

The system allows for power failure with approximately 24 hours of storage. Our on-call sewer operators will be available at all times to attend to any issues.

Ownership and maintenance of the sewerage infrastructure from the pump unit to the street mains will remain Council’s responsibility.

On properties where an on-site sewage management system currently exists, we will:

  • install a sewage pump unit, pump, pump control panel, discharge pipe and boundary kit
  • connect household waste to the pump unit
  • provide an electrical connection to the pump and any electrical capacity upgrades required (provided the existing electrical works comply with current standards).


Property owners will be responsible for arranging and paying for:

  • rectifying any sewage plumbing that does not conform to current standards
  • rectifying relevant electrical works that do not conform to current standards
  • decommissioning of existing on-site sewage management systems following NSW Health Advisory note 3.

Once the scheme is operating, the following costs to property owners will be ongoing:

  • the standard sewer rate, currently $970 annually
  • electrical running costs, approximately $30 per year (for a four-person dwelling).

Vacant lots

Vacant property lots and houses under construction without an on-site sewage management system will have a connection point (boundary kit) installed only.

Future development applicants (for new dwellings) will need to liaise with Council's Water and Sewer services regarding the installation of a new pressure sewerage system.

A standard fee, currently $11,500, will be charged for the installation.

Latest news

March 2020

  • As a safety precaution to limit public gatherings and slow the spread of coronavirus, we have cancelled the community drop-in session for now.
  • When it is safe to do so we will reschedule the event and notify property owners.
  • PS Solutions have also postponed their meetings with individual property owners in May.

January 2020

  • The community drop-in session has be rescheduled due to the bushfire emergency.
  • Come along on the new date, Thursday 23 January, anytime between 3pm and 7pm to the Mechanics Institute, Nelligen. Note: Postponed due to bushfires.
  • Additionally, PS Solutions will be in the village from Thursday 23 January to Monday 3 February to meet with individual property owners.
  • Phone 1800 178 978 to make an appointment to discuss and prepare a plan for the location of the pressure sewer equipment and water meter on your property.

December 2019

  • Nelligen folk are invited to a community drop-in session to find out more about the water supply and sewerage scheme to be rolled out through the village.
  • Come along and chat with our friendly staff to discuss the project design, construction and operation.
  • We will have the components of the new pressure sewer infrastructure on display so you can see what will be installed on your property.
  • See you at the Nelligen Mechanics Institute on Friday 10 January, anytime between 3pm to 7pm. Note: Postponed due to bushfires.

November 2019

  • Landmark Surveys have been engaged to undertake cadastral and engineering surveys throughout the village between November 2019 and February 2020.
  • The data is required to develop accurate plans to ensure the new water and sewer components will be installed within property boundaries.

More info

For further details about the project contact our Water and Sewer Projects Engineer, Harvey Lane: